| Manipe F1 :: News | Standings | Calendar | Contact us |
|
BAR BAR-Honda 007 Technical Specifications Chassis Construction: Moulded carbon fibre and honeycomb composite structure, surpasses FIA regulations. Front suspension: Wishbone and pushrod-activated torsion springs and rockers, mechanical anti-roll bar. Rear Suspension: Wishbone and pushrod-activated torsion springs and rockers, mechanical anti-roll bar. Dampers: Showa. Wheels: BBS forged magnesium. Front– 312mm wide. Rear: 340mm wide. Tyres: Michelin. Brakes: Alcon - Front – 2 x 6 piston callipers - Rear - 2 x 6 piston callipers. Brakes discs/pads: Carbon/carbon. Steering: BAR power assisted Rack and Pinion. Steering Wheel: BAR carbon fibre construction. Drivers seat: Anatomically formed carbon composition. Seat Belts: Six point harness (75mm shoulder strap with HANS system). Fuel Cell: ATL Kevlar-reinforced rubber bladder. Fuel capacity: 150 litre. Battery: 3 Ah lead acid. Instrumentation: BAR steering wheel dash display. Transmission Gearbox: BAR maincase – 7-speed unit, Honda and XTrac internals. Gear selection: Sequential, semi-automatic, hydraulic activation. Clutch: Carbon Plate. Dimensions Front track: 1460mm. Rear track: 1420mm. Wheel base: 3140mm. Overall length: 4675mm. Overall height: 950mm. Overall width: 1800mm. Engine Name: Honda RA005E. Displacement: 3.0 litres. Vee Angle: 90 degrees. Maximum power: Over 900 ps. Maximum revs: Over 18,500 rpm. Valve train: 4 valves per cylinder, pneumatic valve system. Injection system: Honda PGM-FI. Throttle system: Electronic hydraulically-operated system. Ignition system: Honda PGM-IG. |
| Top |
Manipe F1 will not be held liable for publishing unreliable, misleading, incomplete or inaccurate information. Under no circumstances may content on Manipe F1 be copied or re-issued (be it for commercial or non-commercial use) without first obtaining written permission from Manipe F1. Manipe F1 © 2004 - 2008 |
